Skip navigation

Raspberry Pi 4 & USB MBB dongle

The Raspberry Pi is a series of small single-board computers developed in the United Kingdom by the Raspberry Pi Foundation to promote teaching of basic computer science in schools and in developing countries. It is widely used by Device Developers. By extending the board with a USB Mobile Broadband, it becomes a very flexible IoT device development tool.

Main features
Raspberry Pi 4
  • Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
  • 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
  • Gigabit Ethernet
  • 2 USB 3.0 ports; 2 USB 2.0 ports.
  • Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
  • 2 × micro-HDMI ports (up to 4kp60 supported)
  • 2-lane MIPI DSI display port
  • 2-lane MIPI CSI camera port
  • 4-pole stereo audio and composite video port
  • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
  • OpenGL ES 3.0 graphics
  • Micro-SD card slot for loading operating system and data storage
  • 5V DC via USB-C connector (minimum 3A*)
  • 5V DC via GPIO header (minimum 3A*)
  • Power over Ethernet (PoE) enabled (requires separate PoE HAT)
  • Operating temperature: 0 – 50 degrees C ambient

USB Dongle (used for our tests):
  • HSUPA 850/2100 MHz up to 2Mbps uplink and HSDPA 850/2100 MHz 7.2 Mbps downlink;
  • UMTS 850/2100 MHz up to 384 Kbps;
  • Tri band EDGE/GPRS (900/1800/1900 MHz) up to 200 Kbps
Raspberry Pi 4 (and USB Mobile Broadband dongle)
Available resources

SIM/eSIM handling with Data dongle and RPi Test Report

Download here the SIM/eSIM handling with Data dongle and RPi Test Report